7700 - Transponder Codes

Transponder Codes

Transponder codes are four digit numbers transmitted by the transponder in an aircraft in response to a secondary surveillance radar interrogation signal to assist air traffic controllers in traffic separation. A discrete transponder code (often called a squawk code) is assigned by air traffic controllers to uniquely identify an aircraft. This allows easy identification of aircraft on radar.

Squawk codes are four-digit octal numbers; the dials on a transponder read from zero to seven, inclusive. Thus the lowest possible squawk is 0000 and the highest is 7777. Four octal digits can represent up to 4096 different codes, which is why such transponders are often called "4096 code transponders." Care must be taken not to squawk any emergency code during a code change. For example, when changing from 1200 to 6501 (an assigned ATC squawk), one might turn the second wheel to a 5 (thus 1500), and then rotate the first wheel backwards in the sequence 1-0-7-6 to get to 6. This would momentarily have the transponder squawking a hijack code (7500), which might lead to more attention than one desires. Pilots are instructed not to place the transponder in "standby mode" while changing the codes, as it causes the loss of target information on the ATC radar screen, but instead to carefully change codes to avoid inadvertently selecting an emergency code. Additionally, modern digital transponders are operated by buttons to avoid this problem.

The use of the word "squawk" comes from the system's origin in the World War II Identification Friend or Foe (IFF) system, which was code-named "Parrot".