Headstock - Construction Details

Construction Details

Two traditional layouts of tuners are called "3+3" (3 top tuners and 3 bottom ones) and "6 in line" tuners, though many other combinations are known, especially for bass guitars and non-6-string guitars. When there are no machine heads (i.e. tuners are not needed or located in some other place, for example, on guitar body), the guitar headstock may be missing completely, as in Steinberger guitar or some Chapman stick models.

The headstock may be carved separately and glued to neck using some sort of joint (such as scarf joint). There are two major trends in headstock construction, based on how the string will go after passing the nut. The advantages and disadvantages of both trends are very debatable and subjective, so these two variants are used:

• Straight headstocks form a single plane with a flat surface of neck (and fingerboard). This makes neck and headstock easier to manufacture, they can be constructed from a single piece of wood. Fender usually uses non-angled, straight headstocks. Because of the low angle of the string over the nut, string retainers (sometimes referred to as string trees for their tree shape) must be used to avoid the string coming out of the nut while playing.

• Angled headstocks form some kind of acute angle with a surface of neck. The value of "magic angle" (called headstock pitch) that gives the best tone and stability is also very debatable, but it is usually in a range from 3° to 25°. For example, various manufacturers and particular guitar models use:
  • Guitars
    • 4°: Guild
    • 11°: Martin
    • 12°: Bigsby, Yamaha SGV
    • 13°: Peavey, Warmoth
    • 14°: Gibson Firebird V and VII, Gibson X-plorer, some vintage Gibson guitars, Washburn, most budget Epiphone replicas of Gibson models
    • 17°: Gibson ES-335, Gibson Les Paul, Gibson SG, Epiphone Casino
  • Basses
    • 10°: all Gibson basses
    • 12°: Yamaha SBV
    • 14°: most Epiphone replicas of Gibson models
    • 24°: Kinal

Luthiers of both styles frequently cite better sound, longer sustain and strings staying in tune longer as advantages of each style. Fragile construction is cited as a disadvantage of each style too: single piece necks are more likely to break on occasional hit and are harder to repair, while glued-in necks can break with time.

Apart from its main function, the headstock is an important decorative detail of a guitar. It is the place where overwhelming majority of guitar manufacturers draw their logo. Some guitars without machine heads (for example, ones equipped with Floyd Rose SpeedLoader) have a headstock for purely decorative reasons.