Litre - Colloquial and Practical Usage

Colloquial and Practical Usage

In spoken English, the abbreviation "mL" (for millilitre) is often pronounced as "mil", homophonous with the colloquial term "mil", which is intended to mean "one thousandth of a metre", or in the United States, a thousandth of an inch. This generally does not create confusion because the context is usually sufficient — one being a volume, the other a linear measurement.

The abbreviation cc (for cubic centimetre, equal to a millilitre or mL) is a unit of the cgs system, that preceded the MKS system, that later evolved into the SI system. The abbreviation cc is still commonly used in many fields including medical dosage and sizing for small combustion engine displacement, such as those used in motorcycles.

In European countries where the metric system was established well before the adoption of the SI standard, there is still carry-over of usage from the precursor cgs and MKS systems. In the SI system, use of prefixes for powers of 1,000 is preferred and all other multiples discouraged. However, in countries where these other multiples were already established, their use remains common. In particular, use of the centi (10−2), deci (10−1), deca (10+1), and hecto (10+2) prefixes are still common. For example, in many European countries, the hectolitre is the typical unit for production and export volumes of beverages (milk, beer, soft drinks, wine, etc.) and for measuring the size of the catch and quotas for fishing boats; decilitres are common in Switzerland and Scandinavia and sometimes found in cookbooks; centilitres indicate the capacity of drinking glasses and of small bottles. In colloquial Dutch in Belgium, a 'vijfentwintiger' and a 'drieëndertiger' (literally 'twenty-fiver' and 'thirty-threer') are the common beer glasses, the corresponding bottles mention 25 cL or 33 cL. Bottles may also be 75 cL or half size at 37.5 cL for 'artisanal' brews or 70 cL for wines or spirits. Cans come in 25 cL, 33 cL and 50 cL aka 0.5 L. Family size bottles as for soft drinks or drinking water use the litre (0.5 L, 1 L, 1.5 L, 2 L) as well as beer barrels (50 L or the half-sized 25 L). This unit is most common for all other household size containers of liquids from thermocans to buckets to bath tubs; as well as for fuel tanks and consumption for heating or by vehicles.

In countries where the metric system was adopted as the official measuring system after the SI standard was established, common usage more closely follow contemporary SI conventions. For example, in Canada, where the metric system is now in widespread use, consumer beverages are labelled almost exclusively using litres and millilitres. Hectolitres sometimes appear in industry, but centilitres and decilitres are rarely, if ever, used. Larger volumes are usually given in cubic metres (equivalent to 1 kL), or thousands or millions of cubic metres. The situation is similar in Australia, although kilolitres, megalitres, and gigalitres are commonly used for measuring water consumption, reservoir capacities and river flows.

For larger volumes of fluids, such as annual consumption of tap water, lorry (truck) tanks, or swimming pools, the cubic metre is the general unit. It is also generally for all volumes of a non-liquid nature.

Fluid flow rates may be measured in litres per unit time interval (second, minute, hour, etc.).