Mobile Radio - Antenna

Antenna

A mobile radio must have an associated antenna. The most common antennas are stainless steel wire or rod whips which protrude vertically from the vehicle. Physics defines the antenna length: length relates to frequency and cannot be arbitrarily lengthened or shortened (more likely) by the end user. The standard "quarter wave" antenna in the 25-50 MHz range can be over nine feet long. A 900 MHz antenna may be three inches long for a quarter wavelength. A transit bus may have a ruggedized antenna, which looks like a white plastic blade or fin, on its roof. Some vehicles with concealed radio installations have antennas designed to look like the original AM/FM antenna, a rearview mirror, or may be installed inside windows, or hidden on the floor pan or underside of a vehicle. Aircraft antennas look like blades or fins, the size and shape being determined by frequencies used. Microwave antennas may look like flat panels on the aircraft's skin. Temporary installations may have antennas which clip on to vehicle parts or are attached to steel body parts by a strong magnet.

Though initially relatively inexpensive mobile radio system components, frequently damaged antennas can be costly to replace since they are usually not included in maintenance contracts for mobile radio fleets. Some types of vehicles in 24-hour use, with stiff suspensions, tall heights, or rough diesel engine idle vibrations may damage antennas quickly. The location and type of antenna can affect system performance drastically. Large fleets usually test a few vehicles before making a commitment to a certain antenna location or type.

US Occupational Safety and Health Administration guidelines for non-ionizing radio energy generally say the radio antenna must be two feet from any vehicle occupants. (Read the OSHA guidelines before attempting to install an antenna.) This rule of thumb is intended to result in passengers being exposed to safe levels of radio frequency energy in the event the radio transmits.