Details
Commercial and professional mobile radios are often purchased from an equipment supplier or dealer whose staff will install the equipment into the user's vehicles. Large fleet users may buy radios directly from an equipment manufacturer and may even employ their own technical staff for installation and maintenance.
A modern mobile radio consists of a radio transceiver, housed in a single box, and a microphone with a push-to-talk button. Each installation would also have a vehicle-mounted antenna connected to the transceiver by a coaxial cable. Some models may have an external, separate speaker which can be positioned and oriented facing the driver to overcome ambient road noise present when driving. The installer would have to locate this equipment in a way that does not interfere with the vehicle's sun roof, electronic engine management system, vehicle stability computer, or air bags.
Mobile radios installed on motorcycles are subject to extreme vibration and weather. Professional equipment designed for use on motorcycles is weather and vibration resistant. Shock mounting systems are used to reduce the radio's exposure to vibration imparted by the motorcycle's modal, or resonant, shaking.
Some mobile radios use noise-canceling microphones or headsets. At speeds over 100 MPH, the ambient road and wind noise can make radio communications difficult to understand. For example, California Highway Patrol mobile radios have noise-canceling microphones which reduce road and siren noise heard by the dispatcher. Most fire engines and radios in heavy equipment use noise-canceling headsets. These protect the occupant's hearing and reduce background noise in the transmitted audio. Noise-canceling microphones require the operator speak directly into the front of the microphone. Hole arrays in the back of the microphone pick up ambient noise. This is applied, out-of-phase, to the back of the microphone, effectively reducing or canceling any sound which is present both in front and back of the microphone. Ideally, only the voice present on the front side of the microphone goes out on the air.
Many radios are equipped with transmitter time-out timers which limit the length of a transmission. A bane of push-to-talk systems is the stuck microphone: a radio locked on transmit which disrupts communications on a two-way radio system. One example of this problem occurred in a car with a concealed two-way radio installation where the microphone and coiled cord were hidden inside the glove box. An operator tossed the mike into the glove box and shut it, causing the push-to-talk button to be depressed and locking the transmitter on. On taxi systems, a driver may be upset when a dispatcher assigns a call (s)he wanted to another driver and may deliberately hold the transmit button down (for which the owner can be fined by the FCC). Radios with time-out timers transmit for the preset amount of time, usually 30- or 60-seconds, after which the transmitter automatically turns off and a loud tone comes out of the radio speaker. The volume level of the tone on some radios is loud and cannot be adjusted. As soon as the push-to-talk button is released, the tone stops and the timer resets.
Mobile radio equipment is manufactured to specifications developed by the Electronics Industries Association/Telecommunications Industries Association (EIA/TIA). These specifications have been developed to help ensure that mobile radio equipment not only performs as expected by the user, but also to prevent the sale and distribution of inferior equipment which could degrade communications. All specifications should be reviewed by radio system engineers to ensure that appropriate equipment is used to meet the end user's needs.
Read more about this topic: Mobile Radio