Movable Type - Typesetting

Typesetting

Modern, factory-produced movable type was available in the late nineteenth century. It was held in the printing shop in a job case, a drawer about 2 inches high, a yard wide, and about two feet deep, with many small compartments for the various letters and ligatures. The most popular and accepted of the job case designs in America was the California Job Case, which took its name from the Pacific coast location of the foundries that made the case popular.

Regardless of who actually invented the case, in order to make his typesetting more efficient, the inventor arranged the compartments according to the letters' frequency of use. The more frequent letters (t, n, e, i, o, r) are arranged in a rough circle directly in front of the typesetter, while the less-frequently used letters and characters are farther away. The arrangement of the letters in the California Job Case became so popular and commonly adopted that a skilled typesetter could "read" the text set by another typesetter, just by watching the positions of the compartments where the typesetter reached for his letters.

The California Job Case has three sections, with the rightmost sections containing capital letters in alphabetic order except for the "J" and "U", moved to the lowest line to help avoid confusing them with "I" and "V" respectively. The lower case letters and punctuation marks are in the left and center sections, with the numbers 1 to 8 at the top of the center section, while the ligatures (combined letters, such as "ff", "fi", "æ" etc.) are in various locations about the exterior.

In addition to placing the most commonly used letters in setting text in a given language in the easiest positions for the typesetter to get to, the characters' boxes varied in size depending upon the frequency of usage of the character. Thus for English the "e" box is the largest while the "j", "k", "q", "x", and "z" boxes are the smallest.

Prior to the adoption of the California Job Case, the capital letters were stored in a separate drawer or case that was located above the case that held the other letters; this is why capital letters are called "upper case" characters while the non-capitals are "lower case".

Other large compartments in the California Job Case held spacers, which are blocks of blank type used to separate words and fill out a line of type, such as em and en quads (quadrats, or spaces. A quadrat is a block of type whose face is lower than the printing letters so that it does not itself print.). An em space was the width of a capital letter "M" – as wide as it was high – while an en space referred to a space half the width of its height (usually the dimensions for a capital "N").

Individual letters are assembled into words and lines of text with the aid of a composing stick, and the whole assembly is tightly bound together to make up a page image called a forme, where all letter faces are exactly the same height to form a flat surface of type. The forme is mounted on a printing press, a thin coating of viscous ink is applied and impressions made on paper under great pressure in the press. "Sorts" is the term given to special characters not freely available in the typical type case, such as the "@" mark, etc.