Extraction Process
Conventional crude oil is normally extracted from the ground by drilling oil wells into a petroleum reservoir, allowing oil to flow into them under natural reservoir pressures, although artificial lift and techniques such as water flooding and gas injection are usually required to maintain production as reservoir pressure drops toward the end of a field's life. Because bitumen flows very slowly, if at all, toward producing wells under normal reservoir conditions, the sands must be extracted by strip mining or the oil made to flow into wells by in-situ techniques, which reduce the viscosity by injecting steam, solvents, and/or hot air into the sands. These processes can use more water and require larger amounts of energy than conventional oil extraction, although many conventional oil fields also require large amounts of water and energy to achieve good rates of production.
It is estimated that approximately 90% of the Alberta oil sands are too far below the surface to use open-pit mining. Several in-situ techniques have been developed.
Read more about this topic: Oil Sands
Famous quotes containing the words extraction and/or process:
“Logic is the last scientific ingredient of Philosophy; its extraction leaves behind only a confusion of non-scientific, pseudo problems.”
—Rudolf Carnap (1891–1970)
“Science and art are only too often a superior kind of dope, possessing this advantage over booze and morphia: that they can be indulged in with a good conscience and with the conviction that, in the process of indulging, one is leading the “higher life.””
—Aldous Huxley (1894–1963)