Oliver Hazard Perry Class Frigate - Design and Construction

Design and Construction

The ships were designed by the Bath Iron Works shipyard in Maine in partnership with the New York-based naval architects Gibbs & Cox.

The Oliver Hazard Perry-class ships were produced in 445-foot (136 meter) long "short-hull" (Flight I) and 453-foot (138 meter) long "long-hull" (Flight III) variants. The long-hull ships (FFG 8, 28, 29, 32, 33, and 36-61) carry the larger SH-60 Seahawk LAMPS III helicopters, while the short-hulled warships carry the smaller and less-capable SH-2 Seasprite LAMPS I. Aside from the lengths of their hulls, the principal difference between the versions is the location of the aft capstan: on long-hull ships, it sits a step below the level of the flight deck in order to provide clearance for the tail rotor of the longer Seahawk helicopters. The long-hull ships also carry the RAST (Recovery Assist Securing and Traversing) system for the Seahawk, a hook, cable, and winch system that can reel in a Seahawk from a hovering flight, expanding the ship's pitch-and-roll range in which flight operations are permitted. The FFG 8, 29, 32, and 33 were built as "short-hull" warships but were later modified into "long-hull" warships.

American shipyards constructed Oliver Hazard Perry-class ships for the U.S. Navy and the Royal Australian Navy (RAN). Early American-built Australian ships were originally built as the "short-hull" version, but they were modified during the 1980s to the "long-hull" design. Shipyards in Australia, Spain, and the Republic of China have produced several warships of the "long-hull" design for their navies.

Although the per-ship costs rose greatly over the period of production, all 51 ships planned for the U.S. Navy were built. Some Oliver Hazard Perry-class warships are planned to remain in American service for years, but some of the older ships have been decommissioned and some scrapped. Others of these decommissioned ships have been transferred to the navies of other countries, including Bahrain, Egypt, Poland, Pakistan, and Turkey. Several of these have replaced old Second World War-built American destroyers that had been given to those countries.

During the design phase of the Oliver Hazard Perry class, head of the Royal Corps of Naval Constructors, R.J. Daniels, was invited by an old friend, US Chief of the Bureau of Ships, Adm Robert C Gooding, to advise upon the use of variable-pitch propellers in the class. During the course of this conversation, Daniels warned Gooding against the use of aluminium in the superstructure of the FFG-7 class as he believed it would lead to structural weaknesses. A number of ships subsequently developed structural cracks, including a 40 ft fissure in USS Duncan, before the problems were remedied.

The Oliver Hazard Perry-class frigates were designed primarily as anti-aircraft and anti-submarine warfare guided-missile warships intended to provide open-ocean escort of amphibious warfare ships and merchant ship convoys in moderate threat environments in a potential war with the Soviet Union and the Warsaw Pact countries. They could also provide air defense against 1970s- and 1980s-era aircraft and anti-ship missiles. These warships are equipped to escort and protect aircraft carrier battle groups, amphibious landing groups, underway replenishment groups, and merchant ship convoys. They can conduct independent operations to perform such tasks as surveillance of illegal drug smugglers, maritime interception operations, and exercises with other nations.

The addition of the Naval Tactical Display System, LAMPS helicopters, and the Tactical Towed Array System (TACTAS) gave these warships a combat capability far beyond the original expectations. They are well-suited for the littoral regions and most war-at-sea scenarios.