Static Cutting Table
A static cutting table is a type of cutting plotter used a large flat vacuum table. It is used for cutting non-rigid and porous material such as textiles, foam, or leather, that may be too difficult or impossible to cut with roll-fed plotters. Static cutters can also cut much thicker and heavier materials than a typical roll-fed or sheet-fed plotter is capable of handling.
The surface of the table has a series of small pinholes drilled in it. Material is placed on the table, and a coversheet of plastic or paper is overlaid onto the material to be cut. A vacuum pump is turned on, and air pressure pushes down on the coversheet to hold the material in place. The table then operates like a normal vector plotter, using various cutting tools to cut holes or slits into the fabric. The coversheet is also cut, which may lead to a slight loss of vacuum around the edges of the coversheet, but this loss is usually not significant.
Read more about this topic: Plotter
Famous quotes containing the words cutting and/or table:
“Simply because our times are complex, does it follow that our parenting must also be? Must we reject the common sense that what worked so well in the past just because our times are high-tech? We live in such fear of being called “old-fashioned” that we are cutting ourselves off from that which is proven.”
—Fred G. Gosman (20th century)
“The newspaper is a Bible which we read every morning and every afternoon, standing and sitting, riding and walking. It is a Bible which every man carries in his pocket, which lies on every table and counter, and which the mail, and thousands of missionaries, are continually dispersing. It is, in short, the only book which America has printed, and which America reads. So wide is its influence.”
—Henry David Thoreau (1817–1862)