Operation
The directly-heated cathode (or indirectly by means of a filament) produces an electron charge by thermionic emission. This electron stream is attracted to the positively-charged plate (anode), inducing a current. Applying a negative DC voltage ("bias") to the control grid will repel some of the electron stream back towards the cathode, thus isolating the plate from the cathode; full bias will turn the tube off by blocking all current from the cathode. Conversely, increasing the positive DC voltage on the plate will attract more electrons toward it. As grid bias is increased, more of the electron current is repelled, resulting in a smaller current at the plate. An AC signal voltage superimposed on the grid will appear as variations in the plate current; voltage amplification can be obtained by using a suitable value of plate load resistance.
The triode is very similar in operation to the n-channel JFET; it is normally on, and progressively switched off as the grid/gate is pulled increasingly negative of the source/cathode.
Read more about this topic: Triode
Famous quotes containing the word operation:
“You may read any quantity of books, and you may almost as ignorant as you were at starting, if you don’t have, at the back of your minds, the change for words in definite images which can only be acquired through the operation of your observing faculties on the phenomena of nature.”
—Thomas Henry Huxley (1825–95)
“It is critical vision alone which can mitigate the unimpeded operation of the automatic.”
—Marshall McLuhan (1911–1980)