Motion
The valve gear operation combines two motions; one is the primary lead motion which is imparted at the bottom of the combination lever (12). The secondary is the directional/amplitude motion which is imparted at the top. Consider that the driver has adjusted the reversing lever such that the die block is at mid-gear. In this position the secondary motion is eliminated and the piston valve travel is shortest, giving minimal injection and exhaust of steam. The travel of the piston valve is twice the total of lap plus lead.
Contrast this to when the die block is at the bottom of the expansion link (7), giving maximum steam injection and exhaust. This is the most powerful forward setting and is used in accelerating forward from rest. Conversely when the die block is at the top of the expansion link (7), maximal power in reverse is obtained. (On some engines the die block was in the top of the link in forward gear. This type was generally used on tank engines, which worked in forward and reverse equally.)
Once the locomotive has accelerated the driver can adjust the reverser toward the mid-gear position, decreasing cut-off to give a more economical use of steam. The engine's tractive effort is then less than it was at starting, but its power is greater.
Read more about this topic: Walschaerts Valve Gear
Famous quotes containing the word motion:
“A movement is only composed of people moving. To feel its warmth and motion around us is the end as well as the means.”
—Gloria Steinem (b. 1934)
“Two children, all alone and no one by,
Holding their tattered frocks, thro’an airy maze
Of motion lightly threaded with nimble feet
Dance sedately; face to face they gaze,
Their eyes shining, grave with a perfect pleasure.”
—Laurence Binyon (1869–1943)
“Speech belongs half to the speaker, half to the listener. The latter must prepare to receive it according to the motion it takes.”
—Michel de Montaigne (1533–1592)