Resist - Typical Process

Typical Process

  1. Resist Deposition: The precursor solution is spin-coated on a clean (semiconductor) substrate, such as a silicon wafer, to form a very thin, uniform layer.
  2. Soft Bake: The layer is baked at a low temperature to evaporate residual solvent.
  3. Exposure: A latent image is formed in the resist e.g. (a) via exposure to ultraviolet light through a photomask with opaque and transparent regions or (b) by direct writing using a laser beam or electron beam.
  4. Development: Areas of the resist that have (or have not) been exposed are removed by rinsing with an appropriate solvent.
  5. Post-Exposure Bake
  6. Processing through the resist pattern: wet or dry etching, lift-off, doping...
  7. Resist Stripping

Read more about this topic:  Resist

Famous quotes containing the words typical and/or process:

    “New York is the meeting place of the peoples, the only city where you can hardly find a typical American.”
    —Djuna Barnes (1892–1982)

    “When you start with a portrait and search for a pure form, a clear volume, through successive eliminations, you arrive inevitably at the egg. Likewise, starting with the egg and following the same process in reverse, one finishes with the portrait.”
    —Pablo Picasso (1881–1973)